Gorilla 100% Silicone Sealant – White
Gorilla 100% Silicone Sealant – White
- 100% SILICONE SEALANT*
- 30 MINUTE WATER READY
- INDOOR/OUTDOOR – All Weather
- 100% WATERPROOF
- WONT YELLOW, SHRINK OR CRACK
- MOLD & MILDEW RESISTANT
- AVAILABLE IN CLEAR AND WHITE
- GREAT FOR: Kitchen, Bath, Window, Door, Plumbing, Gutters, Auto, Marine and more!**
**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.
TO OPEN: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.
TO USE: All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
- Insert into cartridge gun.
- Apply sealant, pushing bead ahead of nozzle.
- Smooth bead immediately after application, before a skin forms.
30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.
CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solver manufacturer’s instructions.
STORAGE: Store in cool, dry location with nozzle attached. To re-use product, remove nozzle and clean out cured sealant from the tip.
LIFETIME GUARANTEE: The Gorilla Glue Company warrants this product meets indicated performance properties for as long as you own your home if product is properly used and stored. If not satisfied, return proof of purchase or remaining product for replacement product or refund. Refund will not exceed the full price of the product. The Gorilla Glue Company is not liable for damages in excess of purchase price. No other warranties, either expressed or implied are given or made. You may have rights that vary state to state, so above limitation and exclusions may not apply.
For First Aid and SDS information, click here.
APPLICATION TEMPERATURE – Best above 40° F
SERVICE TEMPERATURE – -40° to 350° F
OUTDOOR – Yes
MOISTURE RESISTANT – Waterproof
PAINTABLE – No
SANDABLE – No
STAINABLE – No
CURED COLOR – White
TECHNICAL STANDARDS – Meets ASTM C-920 specification for class 25 uses G,A
STORAGE TIPS – Store in a cool, dry location away from heat. Store with nozzle attached. T
GAP FILLING – Yes. Use backer rod for gaps larger than 1/2″
Is the nozzle reusable?
Yes. Let sealant cure in nozzle completely and then remove cured sealant manually.
Can Gorilla Sealant be used as an adhesive?
Yes, Gorilla Sealant can be used as an adhesive for light duty applications. For heavy duty applications, we would recommend Gorilla Construction Adhesive.
Will Gorilla Sealant bond plastic/vinyl/rubber?
Gorilla Sealant may be used on PVC pipes, but not in high-pressure applications. Gorilla Sealant may not work well on certain difficult to bond plastics, such as polyethylene (PE) and polypropylene (PP), or certain types of rubber with high oil or plasticizer content.
Is Gorilla Sealant food safe?
Gorilla Sealant is compliant for incidental food contact per FDA 21CFR177.2600.
How do I remove Gorilla Sealant from my surface?
To clean surface while Sealant is still wet/uncured, wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried sealant use mechanical means such as scraping or sanding.
What should I do if I think a human or animal ingested Gorilla Sealant?
For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information can be found at: http://www.gorillatough.com/first-aid
How do I remove Gorilla Sealant from body/skin?
Wipe off as much Sealant as possible with a dry cloth. When most of Sealant is removed from skin, wash with soap and water