Gorilla 100% Silicone Sealant – Clear
Gorilla 100% Silicone Sealant – Clear
- 100% SILICONE SEALANT*
- 30 MINUTE WATER READY
- INDOOR/OUTDOOR: All Weather
- 100% WATERPROOF
- WON’T YELLOW, SHRINK OR CRACK
- MOLD & MILDEW RESISTANT
- GREAT FOR: Kitchen, Bath, Window, Door, Plumbing, Gutters, Auto, Marine and more!**
**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.
All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F.
CARTRIDGE: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.
TUBE: Unscrew cap, fold and screw-on nozzle. Cut to desired bead size.
CARTRIDGE: 1) Insert into cartridge gun. 2) Apply sealant, pushing bead ahead of nozzle. 3) Smooth bead immediately after application, before skin forms.
TUBE: 1) Apply sealant, pushing bead ahead of nozzle. 2) Smooth bead immediately after application, before skin forms.
Storage: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.
Clean-Up: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.
APPLICATION TEMPERATURE – Best above 40° F
SERVICE TEMPERATURE – -40° to 350° F
OUTDOOR – Yes
MOISTURE RESISTANT – Waterproof
PAINTABLE – No
SANDABLE – No
STAINABLE – No
CURED COLOR – Clear
TECHNICAL STANDARDS – Meets ASTM C-920 specification for class 50 uses G,A
STORAGE TIPS – Store in a cool, dry location away from heat. Cartridge-store with nozzle attached. Tube-remove nozzle and replace cap tightly.
GAP FILLING – Yes. Use backer rod for gaps larger than 1/2″
LIFETIME GUARANTEE: The Gorilla Glue Company warrants this product meets indicated performance properties for as long as you own your home if product is properly used and stored. If not satisfied, return proof of purchase or remaining product for replacement product or refund. Refund will not exceed the full price of the product. The Gorilla Glue Company is not liable for damages in excess of purchase price. No other warranties, either expressed or implied are given or made. You may have rights that vary state to state, so above limitation and exclusions may not apply.
We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.
For bonded skin, please call 1-800-420-7186 to speak to a medical professional.
Is the nozzle reusable?
Yes. For the tube, we recommend removing the nozzle after each use and replacing the cap to store tube (nozzle can hang from side of tube).For the nozzle, let sealant cure completely and then remove cured sealant manually.
For the cartridge, let sealant cure in nozzle completely and then remove cured sealant manually.
Can Gorilla Sealant be used as an adhesive?
Yes, Gorilla Sealant can be used as an adhesive for light duty applications. For heavy duty applications, we would recommend Gorilla Construction Adhesive.
Will Gorilla Sealant bond plastic/vinyl/rubber?
Gorilla Sealant may be used on PVC pipes, but not in high-pressure applications. Gorilla Sealant may not work well on certain difficult to bond plastics, such as polyethylene (PE) and polypropylene (PP), or certain types of rubber with high oil or plasticizer content.
Is Gorilla Sealant food safe?
Gorilla Sealant is compliant for incidental food contact per FDA 21CFR177.2600.
How do I remove Gorilla Sealant from my surface?
To clean surface while Sealant is still wet/uncured, wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried sealant use mechanical means such as scraping or sanding.
What should I do if I think a human or animal ingested Gorilla Sealant?
For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information
How do I remove Gorilla Sealant from body/skin?
We strongly recommend wearing gloves while working on any project using Gorilla Silicone Sealants. If you do get sealant on your fingers or nails please follow these steps:
1) Wipe off as much sealant as possible with a dry cloth.
2) When most of the sealant is removed from fingers, wash hands with soap and warm water.
3) If sealant is cured, carefully rub or roll adhesive off of fingers.