GorillaWeld

GorillaWeld

GorillaWeld is an incredibly strong, heavy duty two part adhesive. The tough, steel bond epoxy formula has a 4250 PSI bond strength and sets in just 10 minutes. GorillaWeld is waterproof and versatile, creating a long lasting, permanent bond to: metal, plastics*, concrete, ceramics, PVC, fiberglass and more!

Sizes
 

PRODUCT FEATURES

  • INCREDIBLY STRONG: 4250 PSI
  • STEEL BOND EPOXY
  • SETS IN 10 MINUTES
  • WATERPROOF**
  • FORMS PERMANENT BOND
  • DRIES DARK GRAY
  • EASY TO USE
  • BONDS: Metal, Plastic*, Concrete, PVC, Fiberglass, Ceramic
    & More!

 

  • *Not recommended for use on polyethylene or polypropylene plastics.
  • **Bonded wood materials should not be submerged or soaked in water.

All surfaces should be clean and free of debris. To improve adhesion, roughen smooth surfaces with sandpaper before gluing.

  1. Remove cap from each tube and use top of cap to puncture foil seal.
  2. Dispense equal parts from each tube onto a clean, disposable surface.
  3. Mix with disposable mixing tool for approximately 20 seconds until color is uniform.
  4. Apply mixture to surface within 3 minutes.
  5. Clamp surfaces together and leave undisturbed for 10 to 30 minutes. Full cure in 24 hours. Cure time dependent on temperature, humidity and quantity applied.

*Note: Not recommended for use on polyethylene, polypropylene or similar plastics.

APPLICATION TEMPERATURE:  32°F to 90°F

SERVICE TEMPERATURE:  -40°F to 300°F

SET TIME:  10 minutes

CURE MECHANISM:  2 Part Reaction, requires mixing

OUTDOOR:  Yes

FREEZE/THAW STABLE:  Yes

WATERPROOF:  Yes*

PAINTABLE: Yes

SANDABLE: Yes

DRILLABLE:  Yes

SHAPEABLE:  Yes

STAINABLE:  No

CHEMICAL RESISTANT:  Limited

EXPANDS WHEN CURED:  No

SHRINKS WHEN CURED:  No

CURED COLOR: Dark grey

GAP FILLING: Yes

*Not suggested to use on wood materials submerged or soaked in water

Will GorillaWeld  bond plastic/vinyl/rubber?

Gorilla Weld will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP), polyethylene (PE) or similar plastics, or any type of rubber with high oil or plasticizer content.

What does GorillaWeld work best for?

GorillaWeld is ideal for metal and plastic (see above) substrates. GorillaWeld does not sag so it is ideal for vertical surfaces

How should GorillaWeld be stored? 

GorillaWeld should be stored in a cool, dry place. Store away from children and animals.

How do I mix GorillaWeld?

GorillaWeld should be mixed 1:1 for 20 seconds or until uniform prior to application.

Does GorillaWeld become hot during cure?

Yes, mixing the hardener and resin together creates an exothermic reaction and will generate heat during cure. Consideration should be taken on mixing vessel as not to melt.

How long do I have before GorillaWeld begins to harden?

GorillaWeld will begin to harden after 3 minutes. Adhesive should be applied prior.

What surfaces will GorillaWeld bond to?

GorillaWeld is particularly suited for metal, plastic and other rigid surface bonding.

Is GorillaWeld Food Safe?

GorillaWeld is not recommended for direct or indirect food contact and should not be considered food safe.

Why is GorillaWeld odor so strong?

GorillaWeld is based on methyl methacrylate chemistry which has a naturally strong odor. We suggest using in well ventilated area.

How do I remove GorillaWeld from body/skin?

Uncured: GorillaWeld can be harmful through skin absorption and it is strongly recommended that you wear gloves during use.  If GorillaWeld is on skin, try removing with a dry cloth or paper towel and then wash area thoroughly with soap and water.

Cured: Cured material can be rolled off skin. Remove as much cured material as possible and wash area thoroughly with soap and water.

For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information can be found here.

How do I remove GorillaWeld from my surface?

Uncured: Wipe up as much material as possible with a dry cloth and clean any remaining product/residue with Isopropyl alcohol (IPA) or acetone following solvent manufacturer’s instructions.

Cured: For removing cured/dried GorillaWeld, mechanical means such as sanding or chiseling.

What should I do if I think a human or animal has ingested GorillaWeld?

For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team.  Additional product safety and first aid information can be found here.

What if my pet has GorillaWeld on their skin/fur?

Do not remove.  For more direction call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information can be found at here.