- 9 oz. Clear Cartridge
- 8212302
- 2.5 fl oz Tube
- 105044
- 7 fl oz Tube
- Not available
Gorilla
Max Strength
Construction
Adhesive
Clear
Our STRONGEST construction adhesive, Max Strength Clear combines the strength and versatility you have come to expect from Gorilla with a crystal clear, easy to use, non-foaming formula.
CARTRIDGE
TO OPEN:
- Unscrew and remove nozzle from top of cartridge.
- Set nozzle aside. Cut hard plastic tip of cartridge above the threads.
- Replace nozzle.
TO USE: All surfaces should be clean and free of dirt, grease and oil. Best if used above 40°F.
Cut nozzle at 45° angle to desired bead size.
- Insert into cartridge gun.
- Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
- Within 10 minutes, press surfaces firmly together. Repositionable for 30 minutes.
NOTE: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors.
TUBE
All surfaces should be clean and free of dirt, grease, oil and old adhesive. Best applied in temperatures between 10°C and 40°C in a well-ventilated area.
1. Screw on nozzle and cut to desired bead size.
2. Squeeze adhesive on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps.
3. Within 30 minutes, press surfaces together and hold for 30-60 seconds. Heavy items may require temporary support and mechanical fastening.
4. Remove any excess adhesive immediately with a dry cloth. White spirit may be used according to manufacturer’s instructions.
5. Fully cure within 24 hours.
APPLICATION TEMPERATURE – Best above 40° F
SERVICE TEMPERATURE – -40° to 212° F
OUTDOOR – Yes
INDOOR – Yes
MOISTURE RESISTANT – Waterproof
PAINTABLE –Yes, in 2 hours. Best with light brush stroke application.
SANDABLE – Yes
STAINABLE – No
FOAMS WHEN CURED – No
CURED COLOR – Clear
TECHNICAL STANDARDS –Meets APA AFG-01, ASTM C557, and ASTM D3498 specifications.
STORAGE TIPS – Gorilla Max Strength Construction Adhesive Clear is best if stored in a cool, dry location with the nozzle attached filled with adhesive. The leftover adhesive in the nozzle acts as a seal for the adhesive in the cartridge. To re-use product, remove nozzle and remove the cured adhesive from the tip. STORE AWAY FROM CHILDREN AND ANIMALS.
- Our STRONGEST Construction Adhesive Formula
- Dries Crystal Clear
- Works Under Water – 100% Waterproof
- Paintable
- Gap Filling
- Easy to Dispense
- Meets ASTM C557, ASTM D3498 and AFG-01 Specifications
- VOC Compliant
- Low Odor
- Non-Foaming Formula
Frequently Asked Questions
Lorem ipsum dolor amoset
We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.
For bonded skin, please call 1-800-420-7186 to speak to a medical professional.
- What is the best way to open the Gorilla Max Strength Construction Adhesive Clear cartridge?
- 1) Unscrew and remove nozzle from top of cartridge.
2) Set nozzle aside. Cut hard plastic tip of cartridge above the threads.
3) Replace nozzle by screwing it back onto the threads.
4) Cut nozzle at 45° angle to desired bead size.
- 1) Unscrew and remove nozzle from top of cartridge.
- What is the best way to prepare surfaces for bonding?
- All surfaces should be clean and free of dirt, grease and oil. Surfaces can be wet.
- What’s the best way to store Gorilla Max Strength Construction Adhesive Clear?
- Gorilla Max Strength Construction Adhesive Clear is best if stored in a cool, dry location with the nozzle attached filled with adhesive. The left over adhesive in the nozzle acts as a seal for the adhesive in the cartridge. To re-use product, remove nozzle and remove the cured adhesive from the tip. Do not freeze. STORE AWAY FROM CHILDREN AND ANIMALS.
- Is Gorilla Max Strength Construction Adhesive Clear VOC compliant?
- Yes, Gorilla Max Strength Construction Adhesive Clear has less than 6% VOC content.
- How do I remove Gorilla Max Strength Construction Adhesive Clear from my surface?
- To clean surface while adhesive is still wet/uncured, wipe wet adhesive off the project immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried adhesive, mechanical means such as scraping may be necessary.
- How do I remove Gorilla Max Strength Construction Adhesive Clear from my body/skin?
- We strongly recommend wearing gloves while working on any project using Gorilla Construction Adhesives. If you do get construction adhesive on your fingers or nails please follow these steps:
1) Wipe off as much adhesive as possible with a dry cloth.
2) When the majority of the adhesive has been removed, wash hands with soap and warm water.
- We strongly recommend wearing gloves while working on any project using Gorilla Construction Adhesives. If you do get construction adhesive on your fingers or nails please follow these steps:
