For Repositionable Bond (up to five minutes):

Brush an even coat on one surface-join immediately.

For Stronger Bond:

Evenly coat both surfaces, then press wet surfaces together. Excess adhesive rubs off easily, once dried.

APPLICATION TEMPERATURE: Best at room temperature.
SERVICE TEMPERATURE: 50°F-104°F (10°C-40°C) once fully cured.
INDOOR/OUTDOOR: Indoor
MOISTURE RESISTANT: Not water resistant or waterproof
STORAGE TIPS: Store in a well-ventilated place. Keep container tightly closed. Keep away from heat/sparks/open flames/hot surfaces.

We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.

For bonded skin, please call 1-800-420-7186 to speak to a medical professional.

We strongly recommend wearing gloves while working on any project using Gorilla Rubber Cement. If you do get Rubber Cement on your fingers or nails please follow these steps:

1. If glue is wet, wipe off excess adhesive with a dry cloth.
2. Wash hands thoroughly with soap and water.
3. If glue is cured, carefully peel or roll adhesive off of fingers and wash hands thoroughly with soap and warm water.

Acid Free
No, low acid
Adhesive Type
Solvent based rubber adhesive
Animal/Vegan/Gluten Free
There are no animal products, by-products, or derivatives of animal products used. Animal testing is not conducted for this product and it is gluten free.
Appearance
Milky liquid
Color
Uncured: tannish liquid. Dries clear
Coverage
Depends on amount of adhesive applied.
Cure Time
Dependent on amount applied and porosity of substrates.
Dishwasher Safe
Gorilla Glue products are not recommended for dishwasher use on both dishwasher repair or projects to be washed in dishwasher.