Gorilla Fabric Glue

Gorilla Fabric Glue

Gorilla Fabric Glue

Gorilla Fabric Glue is a 100% waterproof, no sew solution for hems, embellishments, trim and more! Formulated to bond fabric, and hard-to-hold embellishments, Gorilla Fabric Glue provides a fast setting, permanent bond that remains flexible after washing. This high strength adhesive dries crystal clear and can be used on a variety of surfaces, making it the perfect alternative to a traditional needle and thread.

Sizes

High Strength
Holds in Seconds
Crystal Clear

PRODUCT FEATURES

  • Crystal Clear
  • Washer/Dryer Safe
  • Holds in Seconds
  • Fast Setting
  • Permanent Bond
  • Flexible
  • Bonds: Fabric, Felt, Beads, Wood, Canvas, Ribbon, Sequins, and more!

For best results, always test on a scrap of intended fabric. Pre wash fabric without using fabric softener. Best if used between 50°F and 90°F.

  1. Apply adhesive to each material to be bonded.
  2. To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining materials.
  3. Press materials firmly together.

Allow a minimum of 24 hours for full cure. Wait a minimum of 3 days before washing and ironing. Wash on delicate cycle and dry on low/no heat.

Application Tips: For best results, adhesive should be applied to both surfaces and left to partially dry before pressing surfaces firmly together.

Color: Dries clear.

Coverage: One pea size drop per square inch. Adhesive can be spread out for more uniform coverage.

Cure Time: Allow a minimum of 24 hours for full cure.

First Aid: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes.  If on skin, rinse well with water. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186.

Flexible When Cured: Yes

Gap Filling: No

Indoor: Yes

Outdoor:Yes

Storage: Wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Store away from children and animals.

Application Temperature: Best if used between 50°F and 90°F (10°C and 32.2°C)

Service Temperature: -4°F to 122°F (-20°C to 50°C)

Water Resistant/Waterproof:  Waterproof.

Working Time: 1-5 minutes. Not repositionable. The best strength results from an open time of 1-2 minutes.