When finished using the glue, hold the bottle upright and gently squeeze it.  Let the glue go up into the tip of the spout.  While holding this squeeze, keeping the glue at the very top of the nozzle, replace the cap.  Your bottle will be a bit misshapen and it will look a little caved-in where you squeezed it since you have used the glue to force all of the air out of the container.  The next time you remove the cap; the air will rush back in and re-inflate your bottle so you can get the glue out.  But when finished, remove the air again from the container before you store it in a cool, dry location..avoid laundry rooms!  Since it is a moisture activated glue, keeping the air away from the glue will prevent the glue from activating in the bottle.

I hope this helps!

Mary-Ellen